Pneumatic Finishing Machine, Edge Banding Finishing, Wood Finishing, Formica Finishing.
Feature:
-Mini pneumatic chamferer Adjustable depth chamfering machine, easy to operate with one hand, quickly cut straight and round corners.
-Double head design, self-adjusting depth, automatic tightening and fixing screws, not easy to fall off.
-Smooth chamfering, no ripple, no noise, no heat after long-term use, stable operation and long service life.
-Five-speed air intake volume adjustment, variable speed to improve the service life of the blade, the air intake volume can be adjusted freely, and the operation is simple and convenient.
-1/4 inch with metal filter to prevent burrs and foreign matter from entering the air inlet and damaging the machine.
Loosen the Torx screw with a hex wrench, remove the deflector, remove the blade screw with a Torx wrench, remove the old blade and replace it with a new blade.
Plate type safety protection switch to reduce unnecessary injuries.
R angle blade, used for cutting and trimming wooden boards.
If you need to cut metal, replace the applicable blade.
-.
Specification:
Color: As the picture shows
Chamfer capacity: 0-1.5mm
Adjustable depth: 0.1-0.9mm
Working pressure: 0.6MPA
Max Speed: 30000RPM
Air consumption: 0.4 m3/min
Finish: N5 (international standard)
Chamfer opening: >8mm
Chamfer Plate Thickness: >3mm
Counterbore hole depth: >5mm